Tra thép hình, tra thép tương đương, chỉ cần 1 cú đúp chuột

Liên hệ QC
Cái này, lúc đầu là mình cũng chỉ có mấy cái sheet trong excel, sau này thấy GFE mới biết ông cel nhà mình làm được nhiều thứ nên mình chuyển sang giao diện vậy nên cũng nhiều thiết sót.
Hiện mình đang có 1 số tài liệu về thép hình của nhiều nước. Nếu có điều kiện mình cập nhật và thay đổi một ít, hy vọng mọi người ủng hộ
 
có lẽ mọi người có kiến thức lập trình đã thiết lập giao diện, để tra cứu thép rất là tiện. Mong anh em cho thêm bảng sheel liệt kê tất cả các loại thép để tiện sử dụng vào các mục đích khác trong thiết kế: ứng dụng trong thiết kế (dò tìm thép thỏa mãn yêu cầu thiết kế). Anh em có tiêu chuẩn thép hình góc đều và góc cạnh đều TCXDVN 1657-1975(1993) up lên cho cùng tham khảo.
Xin cảm ơn.
 
Mọi người giúp mình với, mình đang làm thiết kế môn học có dùng đến thép hình theo tiêu chuẩn ASTM nhưng tìm mãi không được, mong mọi người giúp đỡ, thanks
 
cảm ơn bạn đã bỏ những công sức của mình rồi đem lên anh em xem. thật là một ngừoi có tính cộng đồng tốt
 
BÁc nào có nghiên cứu về vấn đề băng tải của máy ép bùn thì chỉ cho minh ít chiêu ha.Hiện nay môi trường đang cần máy này nên côngty của tôi bắt tôi nghiên cứu chế tạo máy này nên nhờ bác nào có kinh nghiệm tư vấn giúp. Đợi các bác hồi âm.
 
Nhân chủ đề này mình post file tham khảo được
mọi người cùng xem nhé
Thân !!!
 

File đính kèm

  • tra cuu Co khi.rar
    411.5 KB · Đọc: 1,364
em xin chương trình cho em tải hướng dẫn sử dụng các hàm trong tính toán exce
l
 
tra giúp mình mác thép tương đương SCM 40C2
 
Cảm ơn mọi người về chuyên đề náy nhé mình là Phương thành viên mới có gì sai sót xin mọi người chỉ báo thêm
 
Tôi tải về nhưng không mở được. Máy báo lỗi:

"You may encounter this error for the following reasons:
Macro security is set to High and you selected Disable when prompted by the macro warning dialog when opening the file, or the macro was unsigned and was automatically disabled by the application
If the macro was signed and you chose the Disable button when prompted to accept the certificate for the macro when the file was opened, you can use the following procedure to enable the macro:
Close the file and any other instances of the application currently running on the computer (this may include closing any applications using portions of the application you are currently running, such as Outlook which can use Word, database applications, and others).
Open the file again and examine the certificate of trust details and set the Always trust macros from this publisher box if you trust the certificate issued by the publisher.
Click the Enable button to allow the macro to run.
If the macro was not signed (no attached certificate of trust) and you have verified the source of the unsigned macro and believe you can trust it, you can enable the macro with the following procedure:
Select the Tools menu option and then select Macro and Security. In the resulting Security dialog, set the security level to Medium by clicking the Medium radio button.
Close the file and any other instances of the application currently running on the computer.
Open the file again and click the Enable button when prompted to allow for the unsigned macro to run.
When you have accepted the macro, return the macro security level to High.
Another instance of your application has a lock on the security settings and is disallowing any changes to security settings
It is recommended to close all Office related applications or other instances of the same application when you attempt to make changes to your security settings.
Visual Basic for Applications (VBA) is not installed on your computer
If VBA is not installed, it is not possible to accept certificates of trust attached to VBA macros. Therefore, any VBA macro attempting to run, even with an attached certificate of trust, cannot be run because the necessary macro interpreter is not installed on the system. Two scenarios can cause this error:
Your administrator chose not to install VBA
The version of Office you are running does not install VBA by default
If you are running an instance of Office that does not provide VBA as an installable feature, you will need to upgrade your version of Office to run VBA macros.
The certificate of trust is invalid - (when this occurs, you cannot select the Enable button)
The certificate is no longer trusted, was revoked by the issuing authority, or is damaged. There are several other possibilities which you may need to explore as to why the certificate is no longer recognized as valid by your system. It is recommended that you never trust or run a macro that has an invalid certificate.
A troubleshooter help topic is available online regarding this issue."

Có bác nào bết chỉ em cách mở chúng nhé.
 
Cây này
Select the Tools menu option and then select Macro and Security. In the resulting Security dialog đã viết:
Đã hưỡng dẫn bạn làm đấy rồi thôi. Cụ thể:
Chọn vào tools ở thanh công cụ, chọn Macro and Security, trong họp thoại lựa chọn Medium trong đó.
Đây là những kiến thức cơ bản sử dụng excel có sử dụng Macro.
Một điều thắc mặc, bạn đang dùng phiên bản office nào mà có thông báo;

Visual Basic for Applications (VBA) is not installed on your computer
Và cả thông báo nhiều lỗi thế??
 
Sao mình tải về, chạy trên MSOfice 2007 ko được bạn ơi. Nó báo compile error in hidden module: Module 11. Hình như thiếu source! Bạn Nguyễn Công Minh giúp mình với (email: inspironinspiron@rocketmail.com)

Tôi đã up lại file ở bài đầu.


Tôi tải về nhưng không mở được. Máy báo lỗi:

"You may encounter this error for the following reasons:
Macro security is set to High and you selected Disable when prompted by the macro warning dialog when opening the file, or the macro was unsigned and was automatically disabled by the application
If the macro was signed and you chose the Disable button when prompted to accept the certificate for the macro when the file was opened, you can use the following procedure to enable the macro:
Close the file and any other instances of the application currently running on the computer (this may include closing any applications using portions of the application you are currently running, such as Outlook which can use Word, database applications, and others).
Open the file again and examine the certificate of trust details and set the Always trust macros from this publisher box if you trust the certificate issued by the publisher.
Click the Enable button to allow the macro to run.
If the macro was not signed (no attached certificate of trust) and you have verified the source of the unsigned macro and believe you can trust it, you can enable the macro with the following procedure:
Select the Tools menu option and then select Macro and Security. In the resulting Security dialog, set the security level to Medium by clicking the Medium radio button.
Close the file and any other instances of the application currently running on the computer.
Open the file again and click the Enable button when prompted to allow for the unsigned macro to run.
When you have accepted the macro, return the macro security level to High.
Another instance of your application has a lock on the security settings and is disallowing any changes to security settings
It is recommended to close all Office related applications or other instances of the same application when you attempt to make changes to your security settings.
Visual Basic for Applications (VBA) is not installed on your computer
If VBA is not installed, it is not possible to accept certificates of trust attached to VBA macros. Therefore, any VBA macro attempting to run, even with an attached certificate of trust, cannot be run because the necessary macro interpreter is not installed on the system. Two scenarios can cause this error:
Your administrator chose not to install VBA
The version of Office you are running does not install VBA by default
If you are running an instance of Office that does not provide VBA as an installable feature, you will need to upgrade your version of Office to run VBA macros.
The certificate of trust is invalid - (when this occurs, you cannot select the Enable button)
The certificate is no longer trusted, was revoked by the issuing authority, or is damaged. There are several other possibilities which you may need to explore as to why the certificate is no longer recognized as valid by your system. It is recommended that you never trust or run a macro that has an invalid certificate.
A troubleshooter help topic is available online regarding this issue."

Có bác nào bết chỉ em cách mở chúng nhé.


Có thể khi cài bộ Office đã bỏ qua mục Visual Basic for Applications.
 
Lần chỉnh sửa cuối:
mình cần tra khối lượng thép L8x8x1 mà các bảng tra download về đều không có. Có bạn nào biết chỉ dùm!
 
Tôi đang rất cần tài liệu này, càm ơn bạn nhiều nhiều..!
 
cam on ban nhieu

cam on bac nhieu. nhung cho minh hoi ban cua bac tra thep theo tieu chuan nao. neu bac lam va tach duoc cac tieu chuan thi tot de so sanh
 
Chào Công Minh,
Mình vừa download file excel của Minh về, vừa mở lên thì có msg box hiện ra "Automation error"
Mình click "OK" thì VBA hiện ra, nó chỉ ngay sheet7 (trathephinh), nhưng trong đó ko có gì hết.
Mình không thể làm gì thêm, chỉ còn cách tắt EXCEL.EXE trong taskmanager thôi.
Bạn có thể vui lòng chỉ mình cách khắc phục lỗi này không? Mình đang thật sự cần nó.
Cảm ơn.
Trân trọng,
monkey
 
Chào cả nhà!
Thực ra thì thứ mà tôi sắp đề cập đây không có liên quan gì nhiều đến Excel (ngoại trừ chức năng xuất thông số thép ra Excel). Nhưng thấy các bác rất quan tâm đến thép hình, giao diện,... nên tôi xin post lên đây:
Xin trân trọng giới thiệu phần mềm Tra thép hình phiên bản 2.0 beta (dùng thử). Phần mềm chạy độc lập, được viết bằng ngôn ngữ Visual Basic 6.0;
Ngoài những tính năng của phiên bản trước đây, phiên bản mới nhất đã được bổ sung thêm các loại thép: thép hình chữ H, chữ T, xà gồ C và Z, thép hộp (kích thước và các thuộc tính mặt cắt), ray, bu lông. Hơn thế, nó còn cho phép tra cứu các loại thép theo các tiêu chuẩn thông dụng gồm tiêu chuẩn Việt Nam (TCVN) cả bản cũ và bản hiện hành, tiêu chuẩn Nhật Bản (JIS), tiêu chuẩn Đức (DIN), tiêu chuẩn Anh (BS). Với giao diện thân thiện và dễ sử dụng, cơ sở dữ liệu khá đồ sộ (với một số tiêu chuẩn là hàng độc kể cả trên Internet), phần mềm Tra thép hình phiên bản 2.0 có thể coi là một trong những cẩm nang đầy đủ nhất dùng để tra cứu thép ở Việt Nam hiện nay.
Ở phiên bản mới này, để chạy được phần mềm, người sử dụng cần cài đặt (phiên bản cũ có thể chạy trực tiếp). Tuy nhiên, các bước cài đặt rất đơn giản và nhanh chóng.
Tác giả rất mong nhận được sự góp ý của người sử dụng để hoàn thiện phần mềm, sớm ra mắt phiên bản chính thức trong thời gian sớm nhất.
(Lưu ý, việc tôi mới giới thiệu bản dùng thử hoàn toàn là vì lý do kỹ thuật, sau khi đã hiệu chỉnh, thì tôi sẽ share bản chính thức).
Đây là link:
http://www.mediafire.com/?6qr3b0e0va10u59
Mời các bác, ai có nhã hứng thì dùng thử và cho ý kiến.
 

File đính kèm

  • TSTH.gif
    TSTH.gif
    35 KB · Đọc: 639
Lần chỉnh sửa cuối:
bác tqt37c2 cho bản chín thức đi. Phần mềm hay quá. Thank you. Best Regard
 
Web KT
Back
Top Bottom